2 www.pulseelectronics.com g003.y (6/11) pulse ja ck e l e c t r o n i c s antennas for wireless access point antennas a wide array of pulse antennas provide solutions to gsm, cdma, wcdma, lte, td-scdma, wimax, wifi tm, gps, zigbee tm , bluetooth ? , uwb, ism, dvb-h, mediaflo tm , dmb-s, satellite radios, dect and other custom applications. please pick from the charts at htttp://www.pulseelectronics.com/antennas/applications. click on a part number to access the corresponding data sheet. contact pulse for more information on products that are not covered in this catalog. pulses new line of wireless access point antennas offers flexible and economical solutions for wireless device oems. these antennas offer superior transmission and reception between wireless access points. they are compatible with ieee 802.11a/b/g/n, bluetooth and zigbee applications, as well as other products that utilize ism frequency bands. all wireless access point antennas are rohs compliant. for high-volume orders, pulse can custom design antennas for oems. this includes alternative frequencies and a variety of cables/connectors for antenna assemblies. pulse also manufactures build-to-print internal antennas that feature a variety of stamped metal and pcb configurations. antennas for mobile phones solutions for mobile phone antennas part frequency max gain mechanical application/standard number (dbi) length 3 w1063 900mhz 3.0 6.65 /169 ism 868 & 915mhz w1038es 900mhz 3.0 6.65 /169 ism 868 & 915mhz w1010 4 2.4ghz 2.0 3.3/83 802.11b/g/n, bluetooth, zigbee w1030 2.4 ghz 2.0 3.25/82.5 802.11b/g/n, bluetooth, zigbee w1034 2.4 ghz 2.0 4.21/107 802.11b/g/n, bluetooth, zigbee w1037 2.4 ghz 3.2 6.65/169 802.11b/g/n, bluetooth, zigbee w1038 2.4 ghz 4.9 6.65/169 802.11b/g/n, bluetooth, zigbee w1027 2.4 ghz 3.2 4.88/124 802.11b/g/n, bluetooth, zigbee sb24003 2.4 ghz 2.14 2.5/132 802.11b/g/n, bluetooth, zigbee 1. antennas come standard with r-sma male connectors, unless otherwise specified. 2. these part numbers are lead-free and rohs compliant. no additional suffix or identifier is required. 3. inches /millimeters 4. sma male connector single-band 1, 2 pulses customized antennas for mobile phones are based on a thorough knowledge of the design of modern handsets, the antenna requirements, and the challenges of devices functioning in multi-radio environments. pulse has extensive experience in main antenna design and utilizes technologies such as sheet metals, flex radiators, lds, and ceramic solutions. pulse products offer optimal and well-proven solutions for each application and form factor. the product range for mobile phones includes main and complementary antennas and integrated antenna modules, including fully tested speaker/antenna modules optimized for audio and rf performance. w1043 2.4 & 5.0 2.0 4.59/117 802.11a/b/g/n, bluetooth, zigbee w1045 2.4 & 5.0 2.0 4.13/105 802.11a/b/g/n, bluetooth, zigbee w1028 5.15 & 5.85 2.0 4.88/124 802.11a/b/g/n, ism 5.8ghz ism 5.8 ghz, public safety, r380.500.314 2.4 & 4.9 & 5.8 1.6/5 7.15/1822 4.9 ghz, 802.11b/g/n, bluetooth, zigbee 1. antennas come standard with r-sma male connectors, unless otherwise specified. 2. these part numbers are lead-free and rohs compliant. no additional suffix or identifier is required. 3. inches /millimeters *antennas for wireless access point table is continued on next page dual-band 1, 2 part frequency max gain mechanical application/standard number (dbi) length 3 antennas for wireless devices
g003.y (6/11) www.pulseelectronics.com 3 pulse ja ck e l e c t r o n i c s antennas part frequency mechanical cable application standard number 4 length 3 length 3 w1049b030 2.4ghz 3.25/82.5 3/76 802.11b/g/n, bluetooth, zigbee w1049b050 2.4ghz 3.25/82.5 5/127 802.11b/g/n, bluetooth, zigbee w1049b070 2.4ghz 3.25/82.5 7/178 802.11b/g/n, bluetooth, zigbee w1049b090 2.4ghz 3.25/82.5 9/229 802.11b/g/n, bluetooth, zigbee w1049b120 2.4ghz 3.25/82.5 12/305 802.11b/g/n, bluetooth, zigbee 1. antennas do not come with bushing holders. order separately if required. part number: p4208-02a202 2. these part numbers are lead-free and rohs compliant. no additional suffix or identifier is required. 3. inches /millimeters 4. max gain (2 dbi) single-band antenna with i-pex cable assembly 1, 2 part vswr insertion loss cable connector types number 2.4 ghz/6 ghz 2.4 ghz/6 ghz length 2 W9003 1. 2/ 1.3 0.4 d b/ 0.8 db 3/76 r-sma female to i-pex w9006m 1. 1/ 1.3 0.6 d b/ 1.1 db 6/150 sma female to i-pex w9009 1. 2/ 1.4 0.8 d b/ 1.4 db 9/229 r-sma female to i-pex w9011m 1. 2/ 1.2 0.9 d b/ 1.8 db 11/280 sma female to i-pex w9063b170 1. 1/ 1 .9 1.3 d b/ 2.4 db 17/431 i-pex to r-tnc female 1. these part numbers are lead-free and rohs compliant. no additional suffix or identifier is required. 2. inches /millimeters cable assembly 1 antennas for wireless access point (continued) internal and surface mount antenna solutions pulse offers a wide range of standardized internal and surface mount antennas (smd) for wireless device applications. pulse ceramic technology results in robust antenna designs that have outstanding performance. these antennas have an inherent immunity to surrounding antenna signals and hand-effect, which makes them exceptionally suitable solutions for small hand-held devices with multiple antennas. pulse helical antenna technology provides high-performance antennas in a small package that can be easily deployed. these ceramic and helical antennas require minimal ground plane removal for operation, which means saved board space and economical implementation. the smd compatibility of pulses antenna products makes them simple and easy to mount. helical antennas ceramic antennas pcb antenna antennas for wireless devices ( continued) 1. all antennas are rohs compliant 2. impedance 50 w , operating temperature -40c to +85c 3. gc = ground clearance, mm 4. millimeters (mm) 5. = na 6. monopole antenna performance is linked to different tuning circuit recommendations for the variety of applications. consult the data sheet for more information zigbee, ism monopole 7x1.6x1.6 smd gc 11x6 2400, 868, 1575 2.5 (peak) 75/-1.55 -18 ceramic and other w30006 6 zigbee, ism monopole 10x3.2x4mm smd, gc 10.8x6.25 2400 1.5 (peak) 75/-1.25 -6 ceramic and other w3001 6 wlan 3,2 (peak) 7 0/ -1,55 (peak) dualband 10.0x3.2x1.5 smd, 2400C2483.5 2,7 (band edges) 6 5/ -1,85 (band edges) - 8 ceramic gc area 11.60x6.00 5150C5850 4,2 (peak) 8 0/ -0,95 (peak) - 10 w3006 3,0 (band edges) 7 0/ -1,55 (band edges) bluetooth smd, 1,7 (peak) 7 0/ -1,6 (peak) ceramic 3.2x1.6x1.1 gc area 4.00x4.25 2400C2483.5 0,7 (band edges) 5 5/ -2,6 (band edges) - 8 w3008 bluetooth/ wlan/wifi 3.2x1.6x1.1 smd, 2400C2483.5 2,2 (peak) 7 5/ -1,3 (peak) -11 ceramic gc area 4.00x6.25 1,9 (band edges) 7 0 / -1,6 (band edges) w3008c gps smd, 0.7 (peak) 3 (peak) 80/-1,25 (peak) ceramic 10.0x3.2x4.0 gc area 10.80x6.25 1575.42 10 0.3 (band edges) 2,5 (band edges) 7 0/ -1,25 (band edges) -10 w3009 surface mount antennas for wireless devic es 1, 2 application/ antenna mount type 3 frequency rhcp gain 5 max gain efficiency return loss part number size 4 (mm) range (mhz) (dbic) (dbi) (%/db) ( db min) *table for smd antennas for wireless devices continued on next page ?
4 www.pulseelectronics.com g003.y (6/11) pulse ja ck e l e c t r o n i c s antennas *table for smd antennas for wireless devices continued on next page ? see table notes on next page. internal and surface mount antenna solutions (continued) gps smd, -0,2 (peak) 2,8 (peak) 75 / -1,25 (peawk) ceramic 10.0x3.2x2.0 gc area 10.80x6.25 1575.42 10 - 0,7 (band edges) 2,3 (band edges) 7 0/ -1,55 (band edges) -18 w3010 gps smd 0.85 (peak) 3.4 (peak) 85/-0.7 (peak) ceramic 3.2x1.6x1.1 4x4.25/6.25 1575.42 10 0.5 (band edges) 3.0 (band edges) 80/-1.0 (band edges) -12 w3011/a ism 900 smd 2 (peak) 70/- 1.55 (peak) ceramic 10x3.2x4 gc area 10.80x8.25 868-870 0.5 (band edges) 50/- 3 (band edges) -6 w3012 ism 900 monopole 10x3.2x1.5 smd 868-870 1.55 (peak) 45/- 4.5 (peak) -6 ceramic gc area 40x16 w3014 6 ism 868 smd 1.4 (peak) 65/- 1.9 (peak) ceramic 10x3.2x4 gc area 10.80x8.25 868-870 1.4 (band edges) 65/- 1.9 (band edges) -10 w3013 ism 868 monpole 10x3.2x4 smd gc 11.5x7 868-870 1 (peak) 45/- 4.5 (peak) -10 ceramic w3016 6 satellite radio smd, - 0,1 (peak) 2,7 (peak) 80/-1,0 (peak) ceramic 3.2x1.6x1.1 gc area 4.00x4.25 2320C2345 - 0.6 (band edges) 2,4 (band edges) 75/-1,2 (band edges) -12 w3017 dmb-s smd, 3 (peak) 85/-0,7 (peak) ceramic 3.2x1.6x1.1 gc area 4.00x4.25 2605C2655 2,5 (band edges) 80 /-1 (band edges) -10 w3018 wimax smd, 2,8 (peak) 80/-1 (peak) ceramic 3.2x1.6x1.1 gc area 4.00x6.25 2500C2690 1 (band edges) 60/-2,25 (band edges) - 5.5 w3020 dect smd 2.5 (peak) 80/-1 (peak) ceramic 10x3.2x2 gc area 10.60x7.25 1800-1930 2 (band edges) 70/-1.55 (band edges) -12 w3022 mediaflo smd, 2 (peak) 75/1,25 (peak) ceramic 10x3.2x4 gc area 10.60x10.25 716C722 1,5 (band edges) 70 /-1,55 (band edges) -8 w3024 1800 rx diversity smd, 2.5 (peak) 80/-1 (peak) ceramic 10x3.2x2 gc area 10.60x6.25 1805C1880 2 (band edges) 70/-1.55 band edges) -9 w3028 1900 rx diversity smd, 2 (peak) 80 /-1 (peak) ceramic 10x3.2x2 gc area 10.60x6.25 1930C1990 1.3 (band edges) 70/-1.55 band edges) -10 w3029 2100 rx diversity smd, 2 (peak) 80/-1 (peak) ceramic 10x3.2x2 gc area 10.60x6.25 2110C2170 1.5 (band edges) 70/-1.55 band edges) -10 w3030 850 rx diversity smd, 2.3 (peak) 75 /-1.25 (peak) ceramic 10x3.2x4 gc area 10.60x8.25 869C894 0.2 (band edges) 45/-3.5 band edges) -5.5 w3031 900 rx diversity smd, 2 (peak) 65/-1.9 (peak) ceramic 10x 3.2x4 gc area 10.60x8.25 925C960 0 (band edges) 45/-3.5 band edges) -5 w3032 zigbee, ism monopole 3.2x1.6x1.1 smd 2400, 4 (peak) 70/-1.55 (peak) -12 ceramic gc area , 17x20 1575 and other w3043 6 850 rx diversity smd, 0 (peak) 55/-2.6 (peak) helical horizontal 12.4x8x2.5 gc area 8.00x40.00 869C894 -1.3 (band edges) 40/-4 (band edges) -9 w3117 surface mount antennas for wireless devices 1, 2 (continued) application/ antenna mount type 3 frequency rhcp gain 5 max gain efficiency return loss part number size 4 (mm) range (mhz) (dbic) (dbi) (%/db) ( db min) antennas for wireless devices ( continued)
g003.y (6/11) www.pulseelectronics.com 5 pulse ja ck e l e c t r o n i c s internal and surface mount antenna solutions (continued) antennas for wireless devices ( continued) antennas printed circuit board antenna solutions part number 1 application/ standard frequency mechanical dimensions (in/mm) cable length (mm) /connector type gain 2 (dbi) effciency (%/b) w3501 gsm/gprs 850/900/1800/1900 0.98 x 3.43 x .008 25 x 87 x 0.2 56/ i-pex connector 3.75 to 1.5 50 to 55 % w3502 gsm/gprs 850/900/1800/1901 1.69 x 0.67 x 0.02 43 x 17 x 0.5 27.5/ i-pex connector 2 to 1 40 to 60 % w3525bxxx wifi 2.4 ghz 0.42 x 1.88 x .031 10.7 x 47.7 x 0.8 various cable lenghts/ i-pex connector 2 70% w3513 wifi 2.4 & 5 ghz 0.63 x 2.76 x 0.04 16 x 70 x 0.9 250/ i-pexconnector 2 50 to 72 % 1. these part numbers are lead-free and rohs compliant. no additional suffix or identifier is required. 2. 2 dbi max surface mount antennas for wireless devices 1, 2 (continued) application/ antenna mount type 3 frequency rhcp gain 5 max gain efficiency return loss part number size 4 (mm) range (mhz) (dbic) (dbi) (%/db) ( db min) 850 rx diversity smd, 0 (peak) 52/- 2.9 (peak) helical vertical 2.5x8x8 gc area 6.00x11.00 869C894 1.4 (band edges) 38/-4.2 (band edges) -9 w3118a wifi smd, helical 5.0x2.5x5.5 gc area 7.50x5.50 2400C2483.5 1.5 50/-3 -8 w3108 gps smd, -2,1 (peak) 1,3 (peak) 47/-3,3 (peak) helical 5.0x2.5x5.5 gc area 7.50x5.50 1575.42 10 -2,4 (band edges) 0,7 (band edges) 43/-3,7 (band edges) -16 w3110 ism smd, 0.9 (peak) 67/-1.7 (peak) helical 2.5x8.0x8.0 gc area 6.00x11.00 902C928 -0.3 (band edges) 50/-3 (band edges) -10 w3112a ism smd, 0.8 (peak) 66 /-1.8 (peak) helical 12.4x8.0x2.5 gc area 8.00x40.00 902C928 -0.3 (band edges) 51/-2.9(band edges) -10 w3113 dvb-h eu clearance to ground -9 @ 470 planar 45x6.6x5 5 mm 470C750 -6 @ 750 -3 w3510 dvb-h eu -4.5 @ 470 external 50.5x10.5x3.0 470C750 -3.5 @ 750 -3 w3520 wcdma smd, 2.3 (peak) 80/-1 (peak) ceramic 10x3.2x2 gc area 10.60x8.25 1920C2170 1.5 (band edges) 70/-1.55 (band edges) -10 w3040 824-894 -1.0 C -2.5 4-band gsm & 880-960 -1.0 C -2.5 w-cdma 2100 40x8 x6 1710-1880 -2.0 C -3.5 -6 w3530 1850-1990 -2.0 C -3.5 1920-1980 -3.0 C -3.5 2110-2170 -2.5 C -3.5 1. all antennas are rohs compliant 2. impedance 50 w , operating temperature -40c to +85c 3. gc = ground clearance, mm 4. millimeters (mm) 5. = na 6. monopole antenna performance is linked to different tuning circuit recommendations for the variety of applications. consult the data sheet for more information
6 www.pulseelectronics.com g003.y (6/11) pulse ja ck e l e c t r o n i c s part number frequency (mhz) gain (dbi) description length (in/mm) coax 1 connector 1 r380.500.314 2400-250 0/ 4900-5900 1. 6/ 5 swivel mount dipole 7/177.8 rptnc sb450fme3 450-470 2.14 stealth blade 1 0/ 254 3 rg-316 fme sb8003 806-896 2.14 stealth blade 2. 5/ 132 3 rg-174 no conn sb9003 890-960 2.14 stealth blade 2.5/132 3 rg-174 no conn spda24850/1900 824-894/1850-1990 center fed dipole, articulating right angle 6.75/171 sma spwb23150 136-174 wideband 6.7 5/ 171 sma f t3 spwh23832 782-882 whip, standard, ? wave 3/ 76 sma f t3 spwh23918 863-973 whip, standard, ? wave 3/ 76 sma f t3 sphs24832 800-864 helical, standard, ? wave 3/ 76 sma f t2 spda17806/2170tnclar 806-960/1710-2170 5 pentaband swivel mount dipole 7.5/190.5 tnc male w1920g0915 806-960/1710-2170 1.5 stealth blade 4.3/110 3 rg-174 sma male w1920g3658 806-960/1710-2170 1.5 stealth blade 4.3/110 9 rg-174 sma male 1. uhf and vhf portable/terminal antennas also available. antennas for wireless devices ( continued) alte r native antennas ya5900w 890-960 11 dbi fully welded seven element yagi 30/762 n female ya6900w 890 - 960 8 dbi fully welded four element yagi 17.5/444.5 n female oc806/2170tnclar 806 - 960/1710 - 2170 1.5/2.5 pentaband omni ceiling 7 dia/177 dia 8 rg-405 tnc male lp806/2170tnclar 806 - 960/1710 - 2170 0/1.5 pentaband low profile 5.75 dia/146 dia 15' lmr-195 tnc male ro806/2170tncwa 806 - 960/1710 - 2170 4/4 pentaband radome omni 16.5/419 tnc male ro2408nf 2400 - 2500 8 radome omni 20/508 n female ro2408nm 2400 - 2500 8 radome omni 20/508 n male ro4910nf 4940 - 4990 10 radome omni 18/457 n female ro4910nm 4940 - 4990 10 radome omni 18/457 n male 1. variety of coax availble. order separately. single-band infrastructure antennas part frequency gain description length coax 1 connector 1 number (mhz) (dbi) (in/mm) infrastructure solutions alternative wireless solutions pulse offers a wide variety of alternative wireless solutions for applications including machine-to-machine, public safety, hand-held radios, and telematics. * table for single-band infrastructure antennas, continued on next page. ?
g003.y (6/11) www.pulseelectronics.com 7 pulse ja ck e l e c t r o n i c s ro4910nf 4940 - 4990 10 radome omni 18/457 n female ro4910nm 4940 - 4990 10 radome omni 18/457 n male ro5810nm 5725 - 5875 10 radome omni 16.5/419 n male ro5210nf 5150 - 5350 10 radome omni 16.5v419 n female ro5210nm 5150 - 5350 10 radome omni 16.5/419 n male ro5810nf 5725 - 5875 10 radome omni 16.5/419 n female r380.500.218 2400 - 2500 14 planar array - horizontal polarization 12/304.8 8 low-loss shf-142 n female r380.700.203 5720-5820 20 planar array - vertical polarization 12/304.8 8 low-loss shf-142 n female vehicular mount single-band solutions single-band 1 part number frequency (mhz) gain (dbi) description length (in/mm) coax 2 connector 3 nmowb150c 135-174 2 nmo wide band 51.75 /1314 nmo450c 450-750 5.6 nmo uhf field tunable 33/838 lp800nmo 806-960 2 nmo low profle 1.25/32 nmoqw900 890-970 2 nmo 1/4 wave 3/76 gpsmm 1575.4 5 dbic gps magnetic mount 1.7/43 rg-174 gpsdm 1575.4 5 dbic gps direct mount 2.5 dia/63.5 rg-174 gpsnmo 1575.4 5 dbic gps nmo mount 2.9 dia/73.66 ef2405nmo 2400-2500 5 nmo mount elevated feed 13/260.4 ef4905nmo 4900-5000 5 nmo mount elevated feed 10/254 nmo5e2400b 2400-2500 5 nmo whip 8.54/ 217 nmo4e4900b 4900-5350 4 nmo whip 4.5 /114.30 w4000d197 1575.4 1.5dbi/26dbi glass mount 1.97x1.18/50x30 oval rg-174 mmcx w4000g197 1575.4 1.5dbi/26dbi glass mount 1.97x1.18/50x30 oval rg-174 sma w4000j197 1575.4 1.5dbi/26dbi glass mount 1.97x1.18/50x30 oval rg-174 mcx w4000l197 1575.4 1.5dbi/26dbi glass mount 1.97x1.18/50x30 oval rg-174 fme 1. antennas available in multiple frequencies and mounting options. 3. variety of connectors available. order separately. 2. variety of coax available. order separately. 4. all nmo antennas require an nmo mount for installation. antennas for wireless devices ( continued) pulses antenna product line offers the highest quality, most reliable antennas in the automotive industry. pulse antennas combine premium materials with high-efficiency designs, delivering antennas with superior mechanical durability and electrical performance. uv, chemical and impact resistant makroblend ? bases help ensure the highest performance for all your mobile applications. traditional-style mobile antennas are available from 27 mhz to 5.9 ghz, as well as many multi-band designs. whether you need communication interoperability, radio communication, data transmission, increased cellular/pcs coverage or gps tracking, these antennas are the solution. antennas for automo ti ve applications infrastructure solutions (continued) 1. variety of coax availble. order separately. single-band infrastructure antennas (continues) part frequency gain description length coax 1 connector 1 number (mhz) (dbi) (in/mm) antennas
8 www.pulseelectronics.com g003.y (6/11) pulse ja ck e l e c t r o n i c s vehicular mount multi-band solutions antennas nmo mounting antennas for automo ti ve applications (continued) nmo mounting kits 1 part number description cable length coax type connector nmokhfud nmo low / high frequency mount 17 / 5.18 rg-58 / u dual shield, low loss cablew no conn nmokhfudthk nmo low / high frequency thick mount 17 / 5.18 rg-58 / u dual shield, low loss cable no conn nmommrnoconn nmo low / high frequency magnetic mount 12 / 3.66 rg-58 a / u cable no conn nmohfgpsnoconn any nmo mount antenna plus gps 202 / 5130.8 rg-58 / rg-174(gps) no conn 1. all nmo mounting kits are available with a variety of cables and connectors. part number frequency (mhz) gain (dbi) description length (in/mm) coax 2 connector 3 nmo150/450/800 50-165/450-470/806-940 -7/0/1 nmo tri band 4 16.5/419 mmc/p3efme 824-960/1850-1990 4/4 dual band magnetic mount 5/127 rg-58 low loss dual shield fme nmoc/p3e 824-960/1850-1990 4/4 dual band nmo mount 4 4.7/119 gpscw1502 136-174/1575.4 2.14/5 dbic direct feed dual band vhf/gps combi whip 22/558.8 rg-174 sma/smb gpscw450 406-512/1575.4 2.14/5 dbic direct feed dual band uhf/gps combi whip 6.5/165.1 rg-174 gpscw3e800 806-896/175.4 5/5 dbic direct feed dual band gsm/gps combi whip 11.5/292.1 rg-174 gpscw3e900 890-960/1575.4 2.14/5 dbic direct feed dual band gsm/gps combi whip 10.25/260.4 rg-174 gpscpoo 824-960/1710-2170/1575.42 2/2/5 dbic direct feed gps tri band 7.6/193 rg-174 gpscwcpoo 824-960/1710-2170/1575.42 2/2/5 dbic roof mount gps tri band 3.9/99 rg-174 nmohfgps any nmo mount antenna plus gps dependent on antenna/5dbic direct feed nmo mount with gps 202/5130.8 rg-58/rg-174 (gps) __ 1. antennas available in multiple frequencies and mounting options. 3. variety of connectors available. order separately. 2. variety of coax available. order separately. 4. all nmo antennas require an nmo mount for installation multi-band 1
|
